Liquid Dye for Concrete

$57.00

SKU: CONCRETEDYE
Color

Product Description

Integra Liquid Concrete Dye is a penetrating dye that adds color to existing interior concrete. This coloring method provides an elegant decorative appearance without the harsh chemicals, tedious and expensive process of acid-based chemical staining. Beginning with a properly prepared surface, these dyes can be applied and sealed in as little as one day, minimizing down-time. Nano-particles allow the color to penetrate the concrete, resulting in a durable treatment that will not wear away with traffic.

USE FOR:

Polished concrete

interior concrete

overlay toppings

stencil designs

acid stain repair

APPROXIMATELY 200-400 SQUARE FEET PER GALLON, DEPENDING ON POROSITY AND DEPTH OF COLOR DESIRED.

Use pump-up sprayer with conical tip. (acetone resistant sprayer if using acetone.)

Add 1 bottle to one gallon of water or acetone. Use clean water or acetone to rinse the residue from the concentrate bottle into the  1-gallon container. Repeat this step until all SUPER DYE is out of the bottle. Add clean water or acetone to a final volume of 1 gallon. If diluted with acetone, floor can be sealed same day. If diluted with water, floor should be sealed when completely dry. 

To use larger capacity sprayers, adjust volumes. Always apply a test spot in an inconspicuous area before proceeding with a project. 

Apply with a pump up sprayer using a conical, fine-spray tip. Small areas can be brushed using a circular motion to avoid brush strokes. Take care to maintain a wet edge to avoid bleed lines. Do not apply more material than the surface will absorb in 1 minute. If not using a drip-less sprayer, tape a piece of cloth or a small container to the sprayer body to catch drips when not spraying the material. Place the tip of the spray wand on the cloth or into the small container immediately after releasing the spray handle. Apply the dye uniformly to obtain a more uniform final appearance. Apply in a random, circular motion with some overlapping to generate a mottled look that more closely resembles acid stain. Colors should not be blended but you can apply one color over another to create a unique color. Depending on the depth of color that is desired, more than one application may be required.  

Keep a container of clean water or acetone available and place the end of the sprayer wand into it between applications to keep the tip from becoming clogged.Pump-up sprayer with conical tip (acetone resistant sprayer if using acetone).  If not using drip-less sprayer, absorbent cloth or small container to catch drips. Painter’s masking tape and plastic sheeting. Clean water for cleaning equipment.

WARNING! When mixed with acetone, LIQUID DYE is highly flammable and vapors are harmful to the applicator’s health. Great care should be taken when using the product after it has been mixed with acetone!  

Open windows and use fans to achieve adequate air movement.

Make absolutely certain no source of open flame is present.

Flame or ignition sources (e.g. pilot lights, heaters, electric tools, etc.) should not be used or turned on until all vapors have dissipated. 

Keep container tightly closed. Keep/Store away from clothing. Avoid breathing mist. Do not eat, drink, or smoke while using this product.

Use in a well-ventilated environment. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection/upper respiratory protection. Wash skin thoroughly after handling.

FIRST AID INFORMATION: Eye Contact:  Immediately flush with plenty of water. After initial rinsing, remove contacts (if present) and continue rinsing for 15 more minutes. If symptoms persist, call a physician. Skin Contact: Remove contaminated clothing and wash the affected area with soap and water. Call a physician if skin irritation persists. Inhalation: Remove to fresh air. Administer artificial respiration if necessary. Call a physician if symptoms persist. Ingestion: DO NOT induce vomiting. Rinse mouth thoroughly with water. Drink plenty of water dilute the material.

Never give anything by mouth to an unconscious person. Consult a physician.

Warranty and Limited Remedy: LIQUID DYE™ color samples are guides only. DELTA does not warrant color matching to a color chart or to any color guide produced. Actual shade and texture will depend on job site conditions, lighting, installation techniques, dye concentration, and types of concrete used. Verify actual appearance and compatibility with a test area before installing. No claims for color shade variations will be honored.

Specifications

  • Weight: 0.6 lb
  • Width: 7 in
  • Depth: 4 in
  • Height: 4 in

0 reviews